Flying the DHC Dash7 in FSX

Years ago, Milton Shupe and the rest of the Flightsimonline development team released a stunning de Havilland Canada Dash-7 for FS2002/FS2004.  This aircraft became a remarkable workhorse in my virtual hanger.  A four engined turboprop with STOL capabilities clearly is a very capable aircraft that earns its respect.

Sadly, when FSX debuted, the Dash-7 was left behind.  While it did sorta work in FSX, the usual bugs such as disappearing propellers and strange flight dynamics made this aircraft far from a joy to fly.  Lucky for FSX users, Shupe and team ported the recently updated FS2004 version to FSX.  I am happy to say that my workhorse is back for another beating in the FSX virtual hanger.

At dusk, the Dash-7 sits on the ramp at KSBA in FSX

At dusk, the Dash-7 sits on the ramp at KSBA in FSX

I flew it on a two test flights between KSBA and KONT and couldn’t have been happier.  The sounds, the virtual cockpit and cabin/cargo, the flight dynamics and the sexy fuselage all live up the expectation of its original release.  We are indebted to Shupe, Flightsimonline, and the rest of the team for bringing this update to our hangers.

< Visit the DHC Dash-7 Homepage >

Now go do some intense bush flying with tons of cargo!

A New Boeing 727 For FSX

Thomas Ruth is most well known for his Airbus line of models for FSX.  The A340, A330, A310 and A300 come to mind and are constantly in the “Top Files” charts at avsim.com. His models are a great compromise between detail, frame rates and realism.  In addition, Thomas’s consistency across all of his models is exemplary.

Taxi for takeoff at KVCV

He must have run out of Airbus inspiration as he recently released a really cool Boeing 727 package for FSX.  Included are the -100 and -200 models with a few liveries to match.   Included is a detailed virtual cockpit, wing views, and enough eye candy to satisfy any flight sim enthusiast.  My favorite feature is the virtual cockpit as they always a sense of realism to the model.  I don’t care how great the exterior model is, a 2-d panel just doesn’t cut it anymore.  I am a virtual pilot seeking realism and Thomas Ruth delivers!

Gear retraction in early morning sunrise.

For my inaugural flight in a 727-100C wearing UPS colors, I flew an early morning flight from Victorville (KVCV) to San Luis Opisbo (KSBP) to see how she flies and how the frame rates handle this large metal bird.   As I pushed the throttles forward, the 727 very reluctantly started to move.  In fact, my reaction turned to wondering whether or not this thing will ever get up enough speed to take flight.  Since this was a new aircraft and the older jetliners weren’t as responsive as today’s jets, I sat back and watched the needle slowly move around the circle. Eventually, and with room to spare, this UPS 727 took flight!

Turning to course for San Luis Opisbo.

With gear retracted, we made a left turn toward to a heading that would take us to SLO.  The flight was relatively short, with only a few hundred nautical miles separating the two airports.  While in the real world, this would have been costly and there must have be good financial reason for making such a flight, the short distance lets me spend time behind the yoke and get an impression of this awesome bird.  After all, this is A Reality of My Own.

To save you the time, I will simply say this bird cruises well.  The autopilot functioned as it should and the virtual cockpit was an excellent place to monitor traffic, gauges, and the view outside. With fully clickable buttons and good quality gauges, the realism is what we have come to expect from an FSX model.  The engine sound is spot on and you can almost smell the stale coffee brewing in the galley.

Turning to final

Clicking off the autopilot and “stick” flying this bird to landing gave me a chance to feel how this bird really handles.  With just a banking turn after take off and a few minutes of flat and level flying during cruise, I really didn’t have the opportunity to put it through its pace, until now.  I am happy to say that there are no surprises, other than it handles like an older jetliner should.  When you start to bank, it feels sluggish and resists the change in motion.  Bank too much and the nose drops very quickly.   Maneuvering to short final reinforced this as I came in off center and too high initially.

Slammin' down on the pavement

With a little finessing and careful use of the throttles, flaps, and speed brakes, I was able to align with the runway and slow the bird down.  Unfortunately, that day there was a stiff cross wind and I ended landing off center. Initially I was disappointed with myself, but a commercial pilot I know said that they do land off center as the ride is typically a bit smoother. So, maybe I knew what I was doing, but I was surprised how hard I hit the runway.  This was one “hot” landing.  Engaging the reverse thrusters and slowing down was not an issue and I was happy to feel how composed the 727 was despite the harsh landing.

Whew! Made it to the ramp!

Taxiing to the gate proved to be simple, with a straight line shot from the runway turnoff to the ramp.  The 727 turns as expected and it has that jet handling, sluggish to get started, but then speeds up quickly as friction is overcome, forcing one to throttle back to keep the speed down.   Arriving at the gate, it was time to shut down the engines and take another look at the exterior model.  With fully animated doors and operating rear stairs give this three holer more of a sense of realism parked at the gate.  One problem though, is the UPS freighter livery does not have an opening cargo door.  This is likely because the model is a passenger version wearing a freighter livery.  Perhaps a true 727-100F/200F will be released at some point.

Overall, Ruth’s Boeing 727 for FSX hits the mark and is a great addition to my virtual hanger.  Like the Airbus models released before it, this 727 has a great virtual cockpit, enough eye candy to please the gamers and is easy enough on the frame rates that it does not choke our video cards.   Go get it if you haven’t already!

Author: Thomas Ruth
Filename: tom7271.zip (fix: tom72fix.zip)
Download: tom7271.zip on Avsim (fix download)

Update: Thomas Ruth also released the Boeing 727-200 Advanced model.  Follow this link to grab it from Avsim.

An Improved Industry Icon Enters Flight Simulator

The 747-8F Intercontinental Freighter is the next generation freighter that brings the classic industry icon into the new century and beyond.  The popular 747 family set a new standard when it entered service in early 1970.  Its unique partial double deck design and tall stabilizer remind many of a whale, the whale that represents international travel.

With the economy on a downward spiral, commercial travel as competitive ever, and an aging platform, Boeing responded to its customers’ needs for a more efficient, larger aircraft that can haul more passengers and/or freight on less fuel, all the while being a little quieter. Enter the 747-8 Intercontinental, an extensive refresh of 747-400 with next generation engines, new wings, and an extended fuselage.

The 747-8F leaves Everett

Project Opensky has been developing models for Microsoft Flight Simulator for many, many year now.  Their focus on the Boeing family brings the mainstream, workhorse airliners, such as the 737 and 777, to our desktops. Completing the 747 family is the 747-8F which joins the AL-1, Air Force One, and the other 747 variants in POSKY’s download library.

The 747-8F is a beautiful bird and meets the high quality expectations that POSKY is known for.  My only nitpick is that the model does not include a virtual cockpit, which makes flying in FSX a little limiting.   What really impresses me is the wing flex.  Taking off from Everett, I watched in awe as the wings created lift, rose before the fuselage and then gracefully lifted the large airplane into the air!

For more information on POSKY’s release of the Boeing 747-8F, read this announcement.  It is also available for download in their library.  Note, if you intend to use this model in FSX, please download the FSX model package in addition to the base pack.

Cheers!